| A thin-film Ceramic Epoxy coatings Technology with advanced performance properties.
THE "BE THERE" PROPERTY:
Adhesion: measured at >3,000 psi (20.7 Mpa) over carbon steel with very high adhesion values on most substrates. CeRam*Kote 99® also provides excellent adhesion over hydro-blasted surfaces.
MECHANICAL PERFORMANCE PROPERTIES:
Abrasion resistance: CeRam*Kote 99® has only 23 mg loss at 1,000 cycles.
Flexibility: measured at 15% elongation
Lubricity: measured at a static coefficient of friction value similar to Teflon (PTFE) coatings materials, which when coupled with its toughness and extremely high adhesion, creates a performance property delivering Teflon-like lubricity for service in all tough and abrasive working environments.
CORROSION RESISTANCE PROPERTIES: TOP OF THE SCALE
OTHER PERFORMANCE PROPERTIES:
Field repairable: CeRam*Kote 99®chemically bonds to itself with minimal surface preparation.
Machineable: When cured, CeRam*Kote 99®can be honed to achieve tight tolerances.
Time-saving application: CeRam*Kote 99®a one-coat, two-pass, ambient cured system which is applied directly to the properly prepared substrate without need of a primer.
For performance properties beyond comparison, ask for CeRam*Kote 99®a ceramic high performance coatings for use in tough environments to protect expensive equipment.
EXTREMELY HIGH ADHESION TO:
- CARBON STEEL
- STAINLESS STEEL
- ALUMINIUM
- TITANIUM
- FIBERGLASS
- COMPOSITE MATERIALS
- PLASTICS
- CONCRETE
- HIGH ABRASION RESISTANCE
- FLEXIBLE
- HIGH CORROSION RESISTANCE
- HIGH LUBRICITY
- HIGH DIELECTRIC STRENGTH (NATURAL ELECTRICAL INSULATOR)
- LOW PERMEABILITY
- FIELD REPAIRABLE WHEN DAMAGED
- MACHINEABLE WHEN CURED
- ALL INGREDIENTS FOOD GRADE WHEN CURED
- THIN-FILM
- ENVIRONMENTALLY FRIENDLY- 1.65 LB/GAL (198 G/ LIT) VOC's
|
